My husband's cousin just gave birth to a precious little guy about a week ago and this is the card that I made to congratulate her and her husband. The cut is from New Arrival. You can either weld 2 together to make a card or, if you don't have access to Design Studio, you can cut 4 blackout shapes. 2 will be for the front and back-then you will need to glue some strips of paper to those pieces to act as a hinge for the card. My hinges are where the bow is tied and at the wheel. The other 2 blackout cuts are glued to the inside of the card. They serve 2 purposes. The first is to hide the hinges. The second is to make the card sturdier.
After the card is assembled, it's time to decorate the front. You'll need to cut out another baby buggy-this time without the blackout feature selected. Your last cut will be the baby buggy with the shift on. For finishing touches, I added a string of pearls, a bow, some skittles on the wheels, and the heart above the buggy, attached with a small gauged wire that was shaped by wrapping it around a pencil.
Thanks for looking!